The Wu Steel Works has two workshops, one steelmaking workshop and the second steelmaking workshop. The second steelmaking workshop produces ordinary steel, and the first steelmaking workshop mainly produces small batches of steel grades such as special steel. The production processes include hot metal pretreatment, converter, and RH. Degassing and continuous casting produce about 20 furnaces of molten steel per day.
The unit consumption of heavy fuel oil for ladle preheating in the first steel-making workshop is much higher than that in the second steel-making workshop. If the first steel-making workshop is 100, then the second steel-making workshop is 6.8. Therefore, reducing the amount of heavy oil used in the ladle preheating burner of a steelmaking workshop has become an important issue. In order to reduce the energy consumption of ladle preheating, Wu Iron & Steel Institute introduced pure oxygen burners.
According to the comparison of the combustion capacity and combustion characteristics of the pure oxygen burner and the air burner, it can be seen that when the air burner is used, the unnecessary nitrogen (accounting for 79% of the air) is blown in, so the flame combustion temperature will be lowered. , Increase the amount of exhaust gas and increase the heat loss. When using a pure oxy-fuel burner, since the burner only uses the oxygen required for combustion, the flame combustion temperature can be increased to 3000 ℃, and the amount of exhaust gas is greatly reduced, so the heat loss can be suppressed and the effective heat can be increased. Reduce the consumption of heavy oil and reduce fuel costs.
The heating capacity required by the pure oxygen burner is the same as that of the air burner, and it is required to be able to heat the temperature of the refractory lining of the ladle from about 600°C to over 1000°C in about 20 minutes. When the conventional air burner is used, the maximum combustion volume is 520L/hr, while the pure oxy-fuel burner increases the effective heat, so the maximum combustion volume is 350L/hr, which is sufficient.
When the conventional air burner is used, the heating capacity is 20°C/min when the amount of heavy oil burned is 450L/hr, and when the pure oxygen burner is used, the effective heat is increased, and the amount of heavy oil burned is 200～250L. In the case of /hr, the same heating capacity as an air burner can be obtained.
After the introduction of a pure oxygen burner, the combustion efficiency is improved. Therefore, the temperature rise of the ladle refractory before filling the molten steel is as follows. After heating for 15 minutes, the temperature of the refractory will reach 75°C, and after heating for 20 minutes, it will reach 100°C, it will reach 125°C after heating for 25 minutes.
Compared with the air burner, the unit consumption of heavy fuel is reduced by 46% after the pure oxygen burner is adopted, and the energy saving effect is very significant.
According to the comparison of the fuel cost before and after the burner improvement, when the pure oxy-fuel burner is used, although the cost of oxygen has increased, the total fuel cost has dropped by about 37%. At the same time, it reduces CO2 emissions and contributes to improving the environment.
Please keep the source and address of this article for reprinting: Using pure oxygen burner to reduce energy consumption of ladle preheating
Minghe Die Casting Company are dedicated to manufacture and provide quality and high performance Casting Parts(metal die casting parts range mainly include Thin-Wall Die Casting,Hot Chamber Die Casting,Cold Chamber Die Casting),Round Service(Die Casting Service,Cnc Machining,Mold Making,Surface Treatment).Any custom Aluminum die casting, magnesium or Zamak/zinc die casting and other castings requirements are welcome to contact us.
Under the control of ISO9001 and TS 16949,All processes are carried out through hundreds of advanced die casting machines, 5-axis machines, and other facilities, ranging from blasters to Ultra Sonic washing machines.Minghe not only has advanced equipment but also have professional team of experienced engineers,operators and inspectors to make the customer’s design come true.
Contract manufacturer of die castings. Capabilities include cold chamber aluminum die casting parts from 0.15 lbs. to 6 lbs., quick change set up, and machining. Value-added services include polishing, vibrating, deburring, shot blasting, painting, plating, coating, assembly, and tooling. Materials worked with include alloys such as 360, 380, 383, and 413.
Zinc die casting design assistance/concurrent engineering services. Custom manufacturer of precision zinc die castings. Miniature castings, high pressure die castings, multi-slide mold castings, conventional mold castings, unit die and independent die castings and cavity sealed castings can be manufactured. Castings can be manufactured in lengths and widths up to 24 in. in +/-0.0005 in. tolerance.
ISO 9001: 2015 certified manufacturer of die cast magnesium, Capabilities include high-pressure magnesium die casting up to 200 ton hot chamber & 3000 ton cold chamber, tooling design, polishing, molding, machining, powder & liquid painting, full QA with CMM capabilities, assembly, packaging & delivery.
ITAF16949 certified. Additional Casting Service Include investment casting,sand casting,Gravity Casting, Lost Foam Casting,Centrifugal Casting,Vacuum Casting,Permanent Mold Casting,.Capabilities include EDI, engineering assistance, solid modeling and secondary processing.
Casting Industries Parts Case Studies for: Cars, Bikes, Aircraft, Musical instruments, Watercraft, Optical devices, Sensors, Models, Electronic devices, Enclosures, Clocks, Machinery, Engines, Furniture, Jewelry, Jigs, Telecom, Lighting, Medical devices, Photographic devices, Robots, Sculptures, Sound equipment, Sporting equipment, Tooling, Toys and more.
What Can we help you do next?
∇ Go To Homepage For Die Casting China
By Minghe Die Casting Manufacturer |Categories: Helpful Articles |Material Tags: Aluminum Casting, Zinc Casting, Magnesium Casting, Titanium Casting, Stainless Steel Casting, Brass Casting,Bronze Casting,Casting Video,Company History,Aluminum Die Casting |Comments Off
Link to this article：Using pure oxygen burner to reduce energy consumption of ladle preheating
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：ODM Wiki，thanks！^^