Carbon fiber plate is the main application form of carbon fiber prepreg. It has been widely used in many structural parts and has a series of performance advantages, such as light weight, high strength, high temperature resistance, corrosion resistance, etc. This article introduces the production process of carbon fiber plate.The Making Process Of Carbon Fiber PlatePrepreg cutting: Firstly, the prepreg should be cut according to the length and width of the plate, and the thickness of the prepreg should be determined according to the thickness of the plate.Conventional plate thickness has 10mm, 5.0mm, 10.0mm and other different sizes, the greater the thickness of the plate, the more the number of laminated prepreg layers is needed, the general 2mm thickness of the plate, the need for 10 layers of prepreg.Prepreg lay-up: when we produce, we will change the requirements of tensile force and strength according to the plate at any time, so as to meet all kinds of needs to make the product produce better.Determine the lay-up direction and lay-up sequence of prepreg.The lay-up direction includes 0°, 45°, 90° and -45°. In practical operation, the Angle orientation should be selected according to the type of load undertaken, that is, in order to maximize the high performance of fiber in the axial direction.Curing of precut materials: When all precut materials are laid, the precut materials are put into the press, and then cured and formed by high temperature and high pressure. After curing and forming, the required carbon fiber board is obtained, and then processed to a certain extent according to requirements.

Leave a Reply

Your email address will not be published. Required fields are marked *